Crom Transmission & Automotive Specialist
910-353-1258
Maintenance Services
Problem:
Deposits accumulate on intake valves, injectors, ports, fuel injectors and combustion chambers causing loss of power, rough idle, hesitation, misfire, pinging, knocking, mileage and hard starting.
Solution:
• Clean fuel injectors
• Clean throttle body
• Clean plenum and air-intake
• Clean intake valves and ports
• Remove combustion chamber deposits
• Correct balance of fuel and air in system
Result:
• Reduced emissions
• Restored horsepower
• Increased fuel economy
• Starts and idles smooth and runs quiet
Intake valve with heavy deposit build-up.
Intake valve after service.
Problem:
Coolant is depleted of buffering ingredients and becomes extremely corrosive, literally eating holes in cooling system components. By-products of corrosion damage, as well as rust and scale, clog the passageways that conduct the water through the radiator and choke off the flow. This may result in an overheated engine that may be damaged beyond repair.
Solution:
The entire cooling system is first cleaned and then all debris and worn out coolant is completely removed from the system. Then, fresh new premium coolant is added. Conditioners are also included to prevent rust and corrosion and BG Universal Cooling System Sealer is also included to prevent leaks.
Benefits
After this service you'll notice: •Overheating prevention
•Foaming prevention
•Controlled rust and corrosion
•Extended coolant life
•Balanced coolant pH
Benefits
After this service you'll notice:
•Reduced emissions
•Restored horsepower
•Restored fuel economy
Climate Control Service
Problem:
Condensation in your vehicle’s air conditioning system promotes fungus, mold and bacterial growth that is blown into the passenger compartment. Add to this nauseating smell the sound of an A/C compressor making a clacking sound due to a depletion of oil.
Solution:
Clean out the air conditioning lines, evaporator and ventilator and then kill any bacteria mold or fungi. Then, deodorize the entire A/C system and the vehicle’s interior. Finally, after a complete inspection for leaks and wear, our technicians will measure and replenish the oil in the compressor. The air inside your vehicle will be much cleaner and 4 to 5 degrees cooler, thanks to increased efficiency.
Benefits
After this service you'll notice:
•Quieter compressor operation
•Extended compressor life
•Sanitized air
Problem:
The power steering pump produces high pressure between 800–2000 pounds, with high heat. This leads to fluid breakdown and failure.
Symptoms include groaning and whining noises, erratic steering and pump leaks.
Solution:
A powerful cleaner suspends and dissolves varnish and gums in the power steering system and then all of the old fluid is replaced with new high-tech power steering fluid for both conventional sector and rack and pinion. The benefit will be a quieter-operating, longer lasting power-steering system.
Grooves are worn into the soft metal of the spool valve housing by hardened seals. Metallic debris from such wear accumulates in the fluid causing premature component failure!
Power steering spool valve with hardened, cracked seals.
Benefits
After this service you'll notice:
•Eliminated steering squeal
•Corrected "jerky" steering wheel
•Fluid leak prevention
•Reduced wear
